Things When Installing Glass Sliding Doors

Awesome Glass Sliding Doors

Glass sliding doors – The wide glass inside the outside makes not only more light in your home, but also gives you a wide view of the outside of your doors. This is a project that you can do yourself if you have the right material at hand. When you buy the doors, get a set that is appropriate for your climate. If you live in a cold climate with hard winters, get heat insulated glass, which will help prevent heat from flying home. If the doors are a new add-on to your home and not just replace existing doors, you have to frame the wall when you cut an opening for the doors; Follow local building standards to learn what kind of wood you need to use. Shims are small pieces of wood that are placed between the windows and the doors to close any gaps and make sure the frame is level.

You will use different tools in this project. If you have to cut a hole in the wall of the glass sliding doors, you will use a tiger saw to make the cut. If you replace existing doors, you need a pry bar to remove the old tracks and framing. You can use a screwdriver to remove the screws, but it is much faster to use a drill as you need to drill more holes. To drive in nails, you either need a hammer or a nail gun, and you need a level to make sure the frame is level (horizontal straight) and let (vertically straight).

In addition to the materials and tools listed above, there are some other things you need to install glass sliding doors. Caulk is an important point when sealing the door, so you have to lay a layer between the wooden frame on the house and the metal frame of the doors, as well as the outer edges between the frame and the sideways. Blinking is metal (usually aluminum) that runs around the edges on surfaces like ceilings or near doors and windows and helps stop leaks by preventing water from penetrating through gaps in the various layers of material at the edges.

Comments are closed.