Barn sliding door – If you live in a place with rustic decoration and need a door I have a very good solution for you, it is about making a sliding door with pallets. It is more complicated than making conventional furniture, but nothing that is impossible … only with a little idea and constancy you will get it. In principle the idea is to simply make a large wooden panel with the pallet tables, and then this panel will hang like a sliding door using the necessary accessories for it. Here’s how to do it step by step.
To make this door we will need 2 pallets like the ones in the photo, this can vary according to the measurements you need for your door and the size of the pallet tables. You should dismount both to get the tables. On the floor we will put the tables. Then to make rustic barn sliding door with pallet you will nail them between them to get what will be the door, remember that you have to do at least 10cm more than the top of the hole to reach the rail. This is a photo of the door already mounted; in this case this one has a less wide board.
The next step to make rustic barn sliding door with pallet will be to restore and paint it, sanding it may be a good choice. This is a schematic plane of how the guide is fixed to the door and mounted to the wall. There are many types of systems and any will be fine. The guide and accessories to make the barn sliding door will be bought in a DIY store or hardware store. Remember that the length of the guide must be at least twice as large as the hole in the door. We will fix the wheels at the top taking into account that the door is well plumbed and once hung do not touch the floor. And you already have the finished door; you just have to hang it to the guide to see how easily it moves. Many good luck with your project!