Ideas For Install Glass Bifold Doors

Amazing Glass Bifold Doors

Glass bifold doors – Many homes built in the 1970s have obsolete Bifold doors. Adding glass slices is a simple and inexpensive way to give them a modern look. As long as the doors are at least 1 inch thick and made of solid wood, medium density fiberboard, or lamella wood, you’re set to retrofit your existing Bifold doors with glass panels. Thinner doors are not robust enough to keep the weight of the glass safe.

Ideas for install glass bifold doors. Use a screwdriver to remove the Bifold doors from the door frame, along with the hardware, and remove hardware that joins the door panels together. Label and set the hardware aside in a safe place so that you can mount the door when instructed. Examine the doors to determine the size of the opening for the glass. Some Bifold doors have an already existing panel indentation. If you have this style, use the panel indentation as your guide to insert the glass. If not, use a straight edge to draw a rectangle to represent aperture for the glass, using a pen. Drag the border 6 inches from the top and bottom, and 4 inches from the left and right sides.

Install glass bifold doors ideas. Measure the size of the opening, so you know what size glass to buy. Drill a hole in each corner of the rectangle on each door panel. This will act as your pilot hole to cut out the opening for the glass. Follow the line to cut the opening on each door panel with a jigsaw blade. Sand the sawn edges smooth on all openings. Place the ribbed strips along the opening and mark them at a 45 degree angle so the list goes smoothly. Use a casing to cut casting according to your brands. Place the track-fringed edge of crown lists against the cut edges of the door panels. Sand or cut the casting, if necessary, so that each piece fits tight. Slide the molds over 2 inches and apply a thin string of wood threads along the edge of the opening. Place the molding strips back into position on top of the glue string.

Comments are closed.