Vertical blinds for sliding glass doors – According to the Home Depot Buying Guide, laminate curtains are ideal for sliding glass door-to-ceiling windows from floor to ceiling and bay windows. They are available in a variety of colors and textures, including vinyl or fabric. Use outside -mount the blinds that are installed on the wall above the sliding glass door. Unlike the inside-mounted blinds, which fit inside windows, an outside mount allows plenty of room for you to open and close the door without damaging the blinds. Outside-mount blinds are also easy to install.
Measure the length of your vertical blinds for sliding glass doors trace and the length of the blinds to determine if they will fall. You can do this by keeping the blinds up to the door as if they were hanging from the track. Mark where the top of the blinds ends and add a few inches to fit the track. Mark a guideline on the wall above the sliding glass door. The guideline will tell you where to install the track brackets, so make sure there is enough room for the door to open and the door handle. For a two-console system, JustBlinds.com recommends 4-inch marking in both sides of the track. This will be where you hang your brackets. If your blinds require more than two brackets, keep the rest of your markings evenly along the width of the track.
Drill the brackets in place. Use wall anchors and two screws per console to increase safety. In the groove of the braces. Even manufacturers vary, many outside mounted tracks will easily click on location. Target all blind carriers. The transporter is the small clamp that the blinds are inserted. They should all turn in the same direction. You can test them by dragging or twisting the rod or chain that controls the blind direction. Put the blinds to the conveyors. Every blind should have a small opening in the top. Slide the blind into the conveyor until it catches the blind and holds it. Make sure all the vertical blinds for sliding glass doors are inserted in the same dire.