Sliding glass door locks – Determining a sliding glass door latch goes quickly and easily if you have a star screwdriver and replacement door latch ready. Check if the latch is already broken or if it can still be repaired Normally a glass sliding door will have a standard pinhole that can be found in any ordinary door. The rubbish present inside the hardware can cause inability to turn the latch, a common problem sliding door lock. In this case, the graphite pen will put the pen in the lock and squeeze a little lubricating substance into the latch Sometimes the sliding door can have a latch that works by pushing a small hack upside down. Try applying lubricants such as a petroleum based oil or WD 40 in the area to see if it works.
If the lubrication barrier doesn’t fix the problem, it‘s to replace sliding glass door locks remove the screws that secure broken sliding glass door to the door using the screwdriver Visit your local hardware store and present them your broken door lock as a reference for your purchase requirements with the broken door lock with you at the time of purchase will save you from to go back and forth from the store when you happen to buy an incompatible lock. Open the door lock cover and be familiar with all parts and pieces. Different models and styles of glass door locks vary from manufacturer to manufacturer and from model to model, so it’s better to get acquainted with what you bought.
You must install the lock cylinder in the front door frame. Test the sliding glass door locks cylinder by pushing the key into the cylinder and working the lock to make sure that it is’s work. Place the outer or lock side of the door latch in the door. Place the inside of the door lock frame in the door. Place the door handle over the screw holes on the inside of the door frame and tighten the screws by hand tighten the screws to put the door handle in place. When hand tight, use a Philips screwdriver to tighten it more. Close the sliding door and engage the door lock.